Carbide End Mills
16 products available - Order by EDP Number
Request a Quote Find a Distributor Specialty Tools Catalog (PDF)About Carbide End Mills
Severance solid micro grain carbide end mills are stocked in four-flute design, in standard and slow spiral. Two and three flute designs are available to order: indicate the number of flutes at the end of the tool number, for example EM-250-W-3. Experiment within the speed ranges below to produce the best chip on a given machine, workpiece and depth of cut.
Suggested Speeds (Surface Feet per Minute)
| Material | S.F.P.M. |
|---|---|
| Cast Iron | 75-200 |
| Malleable Iron | 75-200 |
| Nickel Chrome | 75-250 |
| Stainless Steel | 75-250 |
| Carbon Steel | 100-250 |
| Nickel | 100-250 |
| Monel Metal | 100-250 |
| Free Cutting Steel | 125-300 |
| Brass Bronze | 125-300 |
| Aluminum and Aluminum Alloys | 125-375 |
| Copper | 125-375 |
| Hard Rubber | 150-450 |
| Zinc Alloys | 200-400 |
| Fibre | 200-400 |
| Plastics | 200-500 |
Ordering Tip
All tools are ordered by their EDP Number (Electronic Data Processing). Find your tool in the table below and use the EDP number when placing orders with your distributor.
Quick Facts
- 16 products in this group
- Made in Saginaw, Michigan
- Precision ground to exacting tolerances
- Available through authorized distributors
- Resharpenable for extended life